Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
On the RJM fuel injection harness there are two wires (#4) next to the green tach wire , one is red and the other is tan "MIL PWR" and "MIL" . What are these for?The directions say they're for a simple light
Just want to revive this thread to see if most people hook these up to a simple light or leave them unattached? Also, just want to confirm these are for "1" light only, correct? Thanks again.
Just want to revive this thread to see if most people hook these up to a simple light or leave them unattached? Also, just want to confirm these are for "1" light only, correct? Thanks again.
Yes, one light. MIL PWR is 12V, MIL is ground side (important if using an LED). If you leave them unattached make sure the MIL PWR wire can't short to ground.