• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

BC Bronco Rear Shock hoop installation - Q's

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
I'm ready to install my rear shock hoop, but it's about 1/8 inch too narrow. Is this normal, and if so what do I do to correct it?
 
Last edited:

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
Most likely your frame is too wide. Just weld it in, the 1/8" gap on either side is no big deal. Measure the overall and I will verify monday.
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
Most likely your frame is too wide. Just weld it in, the 1/8" gap on either side is no big deal. Measure the overall and I will verify monday.

I'll get the measurement for you. I'm sure it's no bid deal, I was just not sure.

Thanks for getting back to me!
 
Top