• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

seed density 2 mass air

roystoys

New Member
Joined
Jul 31, 2006
Messages
42
anybody switched there sd to mass air was wondering where you spliced the mass pig tail in to the sd harness at
 

Socal Tom

Bronco Guru
Joined
Feb 12, 2004
Messages
2,442
Loc.
San Diego, CA
I've done it. WWW.mass-air.com has a harness and the directions to do it. You actually add the wires to the 60 pin connector, and you have to move a couple of wires in the connector as well. If you use an automatic ECU you should also add the Vss from what I've read.
Tom
 
Top