• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Cross Enterprises shock bar

Ohio Bronco 21

Bronco Guru
Joined
Dec 5, 2006
Messages
4,194
Loc.
Cleveland
Hey guys, I picked up a Cross ENterprises Shock bar for the rear shocks. The lower mounts to weld onto the rear end ar not what I expected. Anyone have a pic of how they mount with a shock connected. Looks like I will need shockd with one side being a stud mount (bottom).
 

BroncoDawg

Sr. Member
Joined
Mar 4, 2005
Messages
672
Loc.
Bishop, CA
The axle shock mount brackets should be welded to the front side of the axle so the hole in the brackets faces the front of the bronco and the bolt will be parallel to the ground. Comprende!
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,856
Loc.
Conejo Valley, Ca.
Pics, The center of the mount is welded 4" away from the inside leaf spring perch.
 

Attachments

  • IMG_2595.JPG
    IMG_2595.JPG
    120.5 KB · Views: 18
  • IMG_2594.JPG
    IMG_2594.JPG
    94.9 KB · Views: 21
  • IMG_2593.JPG
    IMG_2593.JPG
    112 KB · Views: 23

mudstud

Contributor
Bronco Bonehead
Joined
May 19, 2005
Messages
1,504
I have some pictures of my install in my gallery.
 
Top