• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Aod Tv Cable Adj.?

American Pride

Jr. Member
Joined
Nov 9, 2005
Messages
119
Loc.
L.I.,NY
So I have the lokar set-up for the carb-aod. I am stuck on the tv adj. What type of gauge do I need and where could I find one?
 

siderbox

Bronco Guru
Joined
Nov 5, 2007
Messages
1,119
OTC makes a gauge block (307-152) that measures about 0.272".
You install that at the TB on the TV linkage then set the TV pressure between 30 and 40 psi.

Here is what the gauge block looks like
http://www.etoolcart.com/browseproducts/Throttle-Valve-Gauge-Block.html

Unable to find a good pic of the TV linkage at the TB.
I'll keep looking.

The pic below is on the pass side toward the rear of the pan.
 

Attachments

  • 431000_illus1.gif
    431000_illus1.gif
    4.1 KB · Views: 8

siderbox

Bronco Guru
Joined
Nov 5, 2007
Messages
1,119
Guess I miss the carb part in you post the first time I read it.%)
The gauge block is for the EFI set up. Your set up will be the same procedure just maybe a different gauge block.
Does the Lokar peeps have any info or procedures?
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
14,678
Get a custom valvebody from Lentech and it eliminates the TV cable..
 
Top