• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

dual groove pulley

myemontana

Jr. Member
Joined
Dec 12, 2008
Messages
67
Loc.
Boise
I need the double V-groove pulley for the water pump and crankshaft to finish my powersteering. Have a hard time spending $170 for a set of aluminium pulleys from the Bronco websites. I have no problem with black steel. Anyone have part numbers or know of other vehicles I can get these from?
Thanks
 

Buldozer

Bronco Virtuoso
Joined
Oct 17, 2007
Messages
3,065
Loc.
God's Country
Actually there are several part numbers that will work in that application...different diameter pulleys. You can usually find them on ebay if you don't have a u-pull-it nearby. I purchased one off ebay a few months back for $5.
 

Jeepster

Bronco Guru
Joined
Jul 13, 2001
Messages
1,507
Post in "parts wanted" There have been several sets for sale in the past.
 

OsideDave

Sr. Member
Joined
Nov 18, 2006
Messages
878
I got Al. one from BCB, slightly smaller diameter to turn fan faster when going slow. Forgot price but it was reasonable. No were close to $170
 
Top