• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Atlas 2 problem

jpopsbronco

Full Member
Joined
Aug 30, 2008
Messages
269
Loc.
Irvine, CA
Yesterday while driving i would hear a tinking noise coming from the rear but only under load. Makes noise in 2low 4low 2high 4high the noise intensifies when turning in 4wd(transfer case, driveshaft+u-joints, rearend) upon further investigation the noise is coming from the tranfercase output area/ u joint area. Replaced all u joints and it still does it!!! its definatly coming from my atlas 2... anyone else had this problem? are they expensive to get worked on? joe
 

1WILD69

Jr. Member
Joined
Jul 3, 2008
Messages
103
Loc.
south range
The output yoke on mine had the nut back off. Uesd locktite tourqued it back and it been good to go. I was having the same noise that you described.
 
Top