• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wiper Motor

66fora69er

Contributor
Sr. Member
Joined
Dec 9, 2006
Messages
481
I am putting in an electric wiper set up where the Vac setup used to be. already lengthened the linkage. Cant find in a tech write up were the motor goes. could someone measure the distance from the passenger side of the windshield to the motor please and let me know? I guess the more precise the better. Thanks. If I could get it done tonight I might be able to get it inspected tomorrow;D Not sure if they inspect on Sundays:(
 

NGABronco

Contributor
Bronco Guru
Joined
Feb 4, 2007
Messages
7,350
Loc.
N. GA now South Carolina
Hey 66, here are some pics. Measuring from the inside rail to the left side hole is dead 24", the right hole is like 19 &3/4". Do the left and make the right fit!!!;D ;D

Hope this helps!!
 

Attachments

  • DSCN2426.JPG
    DSCN2426.JPG
    150.6 KB · Views: 5
  • DSCN2427.JPG
    DSCN2427.JPG
    150.6 KB · Views: 8
  • DSCN2424.JPG
    DSCN2424.JPG
    139.7 KB · Views: 5
  • DSCN2429.JPG
    DSCN2429.JPG
    112.3 KB · Views: 5
  • DSCN2428.JPG
    DSCN2428.JPG
    122.6 KB · Views: 3
  • FSCN2425.JPG
    FSCN2425.JPG
    153.3 KB · Views: 5
Top