Replacing One Radius Arm Question.....

luderchris · Apr 23, 2010

If I am replacing one radius arm, do I need to go through the whole Anti Bronco lean procedure or can I just replace the one side and it should be good with no lean?

Basically, I am trying to avoid the extra work of taking apart both sides.

Thanks in advance for the help.

Chris

70_Steve · Apr 23, 2010

Replace the one arm. If it leans take it all apart!

luderchris · Apr 24, 2010

70_Steve said:
Replace the one arm. If it leans take it all apart!

That's the plan, but should it work or should I expect to do it twice?

DirtDonk · Apr 24, 2010

I would think it's always going to be a hit-or-miss thing. Never done just one myself, but it seems that if you have to match them when installing 2, you'd still have to do it for just 1.
Personally though, I wouldn't bother to take the whole thing apart if all I needed to do was replace one.
I'd just take my chances.
But then, I've never had a huge issue with it either! So I'm still acting on that innocent assumption that everything will work the first time. Hah!
Some do though, so up to you.

Paul

luderchris · Apr 24, 2010

I guess we'll see.

duder · Apr 24, 2010

70_Steve said:
Replace the one arm. If it leans take it all apart!

I agree... you should be fine with a few possible adjustments.

Replacing One Radius Arm Question.....

luderchris

Bronco Guru

70_Steve

Old Guy

luderchris

Bronco Guru

DirtDonk

Bronco Guru

luderchris

Bronco Guru

duder

Full Member

Similar threads