• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Another quarter panel question...

CP71

New Member
Joined
Oct 12, 2009
Messages
19
Loc.
Dallas
I have to replace the driver side lower quarter panel and tail light section. I am also having all the body molding holes filled. My question is how much of a pain is it to replace both quarter panels and tail light sections? Since the metal is not that expensive, seems like it would be cheaper to replace than to have a body guy fill in the holes. So my next question is, does anyone have picture of the process of replacing the quarter panel?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
47,345
Don't know if it makes it harder or not, but the rear corners I've seen so far don't even come with a real lip, so welding the light/corner section to the bedrail/lower doesn't look that straightforward.
I'm curious to hear what others say about it as well.

So back to the top...

Paul
 
Top