• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Whats this?

zachdub72

New Member
Joined
Jun 15, 2010
Messages
12
P3200169.jpg
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,316
That's an abnormally large gap. That arm might be rusted/broken in two.
 

Fitz24

Contributor
Bronco Guru
Joined
Jul 4, 2007
Messages
1,299
I don't think you should be able to see through that gap to the exhaust:eek:
 
OP
OP
Z

zachdub72

New Member
Joined
Jun 15, 2010
Messages
12
Yup its broken!

JUst wondering where i can find a new one and if I should jus replace both?
 

stock1970

Bronco Guru
Joined
Apr 2, 2008
Messages
1,793
Loc.
Olathe, Kansas
maybe it would be a good time to upgrade to so long arms and if not I am sure someone that has may have some for free in your area..
 

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
Looks completely cracked/broken to me. Can you move the arm around with your hand? Looks like it may have rusted badly then just cracked in half.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,033
Wow...that's alotta rust. You might post up where you are located as radius arms aren't typically that hard to come by. They're pretty heavy and long, so shipping can get a bit ugly. Better not to ship if you don't have to. You have aftermarket options through the vendors as well if you want to upgrade from the OE units.
 
Top