Swaping to NP435

jperry1290

Sr. Member

Joined

Jul 1, 2010

Messages

908

• Sep 21, 2010

• #1

I want to switch from my 3spd man trans to a NP435. What parts do I need to buy? What parts can be reused? Does the bell housing work for both? What about the output shaft?

 

Revelation

Bronco Guru

Joined

Oct 9, 2004

Messages

4,810

• Sep 21, 2010

• #2

Bellhousing works, You will need the NP435 with the short output shaft, Other than that you will need either an intermediate housing ( http://broncograveyard.com/bronco/i-11360-new-process-435-swap-kit-square-pattern.html ) or a 6cyl Intermediate housing and an adapter ( http://www.bcbroncos.com/store/product_info.php?products_id=176 )

Well worth it IMO.

 

ET

Contributor

Bronco Guru

Joined

Jun 14, 2001

Messages

1,796

• Sep 22, 2010

• #3

If you still have the stock 3 finger clutch, I'd suggest going w/ a Luk diaphragm clutch.

 

siderbox

Bronco Guru

Joined

Nov 5, 2007

Messages

1,119

• Sep 22, 2010

• #4

I have a 6 cyl intermediate housing if you go that direction.

 

Nightstick

Bronco guy

Joined

Feb 6, 2010

Messages

2,929

• Sep 22, 2010

• #5

Too bad you don't live near me, I have one that'll mate up to an NP205 which is cheaper than getting the conversion kit for a D20. You may wanna consider going that route if money is an issue.