• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dana 20 repair questions

figo40

Jr. Member
Joined
Sep 22, 2010
Messages
115
Loc.
St. Louis
Hey guys,
I am not really new here I had to reregister because I couln not rember what password or email account I used. I was figo before. Any way on to my question My 69 lives at my cabin about 60 miles from home and it is a pita to get it home. I need to repair the transfer case, I can grab the front driveshaft and wiggle it all around, it's like there is no front bearing on the output shaft. Now for the dumb question, can I get to and replace the bearings without removing the t case? I swapped the front dana 30 for a 44 laying in the dirt and rock, and really don't want to try another project like that again.
Thanks,
figo
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
7,805
if its that bad, my bet is the rest of the d20 needs to be looked at.
 
Top