• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tru-trac - D44 clicking when turning

kc15842

Sr. Member
Joined
Jan 7, 2010
Messages
629
Loc.
Lake Elsinore, Ca
Just testing all functions of the fresh build. In the dirt, stock locking hubs locked, I get a horible clicking sound when turning the wheel. I need to make fairly large sweeps to not hear the clicks. Is it my axle shafts? The feel fine??? Thanks
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
47,355
Doesn't sound right for a Tru-trac. The diffs themselves are usually pretty seamless.
Sounds a lot like one of the hubs is not locking fully.
Does it make the sound with either one of the hubs unlocked?
Might help narrow it down at least.

Good luck.

Paul
 
OP
OP
K

kc15842

Sr. Member
Joined
Jan 7, 2010
Messages
629
Loc.
Lake Elsinore, Ca
Doesn't sound right for a Tru-trac. The diffs themselves are usually pretty seamless.
Sounds a lot like one of the hubs is not locking fully.
Does it make the sound with either one of the hubs unlocked?
Might help narrow it down at least.

Good luck.

Paul

Good suggestion, I'll check it, thanks
 
Top