• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

motor stops running

leosangon

New Member
Joined
Feb 25, 2010
Messages
8
Loc.
macunguie
i need help ,every time that i go from park to reverse or drive the motor stops runing ,this is a c4 transmision just rebuild ,im in the process of my first frame off resto 1974
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
34,833
Set the engine timing correctly (base under 10°)
Make sure the vacuum advance is connected to the ported vacuum connection on the carb, not full vacuum.
Check for vacuum leaks.

That generally takes care of it most of the time.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,875
Make sure your idle is set at 750 rpm in park before you go into gear.
 
Top