Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
my new flaming river column ....the horn will only blow when i use the tuning signals, and turn steering wheel. or if i pull the turn signal lever to me. anybody had this problem, or possible solution?
My horn works fine but If I push in on the turn signal leaver it will go off, hooked up the indicator light and it does not seem so sensitive anymore.
Do you guys have the polished stainless column? it's a beauty!
I had the same problem. I can't remember exactly what the fix was but it's fairly simple. There is a screw under the horn button with a wire running to it, that screw contacts the housing and grounds out. A little surgery on the screw is necessary.