H block

zoob

Sr. Member

Joined

Nov 24, 2010

Messages

388

Loc.

Long Island, NY

• Jul 18, 2011

• #1

Hey was wondering if anyone had the compression fitting sizes for the h block located on the frame that the master cylinder is connected too? Looks like there two different?

 

shamu

Lucky as the day is long.

Joined

Jun 18, 2009

Messages

5,290

Loc.

Sachse,Tx

• Jul 18, 2011

• #2

If you are going to make your own lines you need a double flaring tool, or take what you have and match them up with with a true brake line at your nearest parts store. They will have adapters to make it work.

A compression fitting will blow off the line and it gets ugly with out brakes.

 

Attachments

• 
  H Block 001.jpg

  92.3 KB · Views: 17

B

broncnaz

Bronco Guru

Joined

May 22, 2003

Messages

24,341

• Jul 18, 2011

• #3

Dont know the sizes but I got adapters from the local parts store to adapt to standard brake lines. I could swear one was the same size as what comes on standard 3/16" brake line and the other was the next size up so you may only need one adapter.