• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

351w ps q

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,734
I've rounded up most everything for PS set up

* WH Pulleys
* TBP Tension Bracket & Saginaw Pump Bracket
* Stock Steering Box
* Saginaw PS Pump
* New hoses if the current don't work
* Will need to get bolts for the Pump, didn't come w/any.
* Need V belt

How can I tell on this 83 motor if I need the pump adapter bracket that goes on the front?

http://broncograveyard.com/bronco/i-10748-351w-power-steering-pump-adapter-bracket.html

Thanks,
 

Crawdad

Bronco Guru
Joined
Feb 16, 2011
Messages
3,635
You can use that one or the one from WH. You will need spacers (various sizes) that will fit b/ the PS pump and the PS bracket. I'm in the middle of transitioning over to a Sagi pump. I got all my brackets from WH. I did have to modify my bracket since it was made for a single return pump (I had to notch it out some to fit the bigger sagi pump b/c of largr reservoir). I went to Napa and picked up the fitting and pulley today during lunch (apprx $36).
 
OP
OP
sprdv1

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,734
Gracias..

Napa is where I had intended to go for the belt, and hoses if necessary.
 
Top