Patrick.M
Jr. Member
While trying to put the explorer brackets on my carb'ed 302 I noticed the drivers side bracket is going to really interfere with the vacuum port on my distributor.
I've heard you can grind the bracket down but it looks like its interfering near the pulley bolt hole.
Is there another distributor I could get that would work with this setup?
Also I've heard you can clock the distributor so that it won't interfere. Any ideas on how to do this without screwing up the timing?
Thanks
Patrick
I've heard you can grind the bracket down but it looks like its interfering near the pulley bolt hole.
Is there another distributor I could get that would work with this setup?
Also I've heard you can clock the distributor so that it won't interfere. Any ideas on how to do this without screwing up the timing?
Thanks
Patrick