• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

How do I identify a Bronco driveshaft?

kaw550

Bronco Guru
Joined
Jul 4, 2007
Messages
1,133
I have a driveshaft that came with the truck. It looks exactly the same but the shaft has a smaller diameter.

From what I cen tell the yoke ends are the same. DId they come in diferent sizes?

I know there was an early and late but they seem to have the same size U joints.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,378
Loc.
North Metro, MN
my front was large diameter and my rear was a smaller tube. I ended up cutting the front one up and lengthing it and using it for the rear. Had to buy a different yoke for the transfer case because some yokes are borg-warner and some are spicer. different hole locations.
 
Top