• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need help. 3 speed manual stuck in 1st

asinor

Bronco Guru
Joined
May 13, 2011
Messages
1,396
Loc.
Tulsa, OK
I'm stuck. My 3 speed is stuck in 1st and I'm stranded. What are the neutral positions for the shift levers/forks?

Sent from my T989 running 4.0.3 using TapaTalk 2
 

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
They should have one forward click and one rear each, in the middle on both should be neutral. I've not looked under there recently, but I want to say straight up and down for the levers is neutral.

I think the front lever is Rev / N / 1st (Rev toward front of truck, 1st leaning to rear.)

I hope that is accurate, and hope it helps you.
 

daren

Jr. Member
Joined
Nov 29, 2010
Messages
80
I had the same problem before. The shift levers were out of adjustment and I had to crawl underneath and get both levers vertical to get it in neutral. Then I had to re-adjust the rods going from the transmission to the shifter.
 
Top