• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Inserts on spring hangers

zeusakira

Full Member
Joined
Jun 22, 2002
Messages
228
Loc.
Butler, PA
Can some one help me out? I have the spring hangers and new poly bushings. The bushings won't fit unless I take out a metal sleeve that looks like part of the hanger. Is there a trick to getting these out?
 

cpereira

Jr. Member
Joined
Sep 13, 2001
Messages
148
Loc.
Belmont, *CA
Try sawing a line down threw center of the sleeve with a hacksaw. Then pound the hell out of sleeve. <br><br>Or, I've had success with drilling the old rubber out and the pound the hell out of it.<br><br>I've also tried burning it out.....Major mess. But, it worked.
 
Top