Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
The measurment on my 1975 is 3 and 1/4 inches from the top of the front rubber bump stop to the bottom of the frame. Does this mean my Bronco has a 1 inch lift on the front? Thanks
I think you have them backwards. From the round part of axle tube to the bottom of the frame stock is 7", the rear number is about 1" less. My experance.