• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bushing Replacement

Go_Vols_Bronco

Jr. Member
Joined
Aug 1, 2006
Messages
81
Loc.
North Texas
Hey,

I am replacing my 170 and tranny on my '67 EB with a newly rebuilt 200 and transmission from a '65 Mustang. Based on the specs, the 200 and tranny should bolt right in. The question I have is what Bushings and mounts should I replace since I have the engine and tranny out? My Bronco is 1967 and everything is stock and nothing has been replaced in 30+ years.

Thanks for the assistance!

Mark
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,341
The mustang tranny wont bolt to the t case use your current tranny. Motor mounts and t case mounts are always a good idea to replace when you have everything apart.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
while you have the extra room and the weight off, you might turn your attention to your front suspension.
 
Top