Just got my pair of Lucky 13s in the mail the other day. Can't wait to put them on the bronco and will post pics when I do! Quick question, Heuss: is there an instruction sheet for wiring in the DRLs or blinker?
Sent from my iPhone using Tapatalk
Sorry about that - you were supposed to have received instructions with the lights, my apologies. Here's the info:
Your new Lucky13 headlights can be installed to operate the low and high beam lights with no modification to your existing wiring. Simply plug the stock headlight plug into the green plug on the back of the Lucky13 headlight and you are all set! If you wish to use the Daytime Running Light (DRL) and/or the turn signal features please follow these steps:
DRL
The DRL is controlled via the red wire coming out of the back of the headlight. To operate the DRL, this red wire can be connected to any 12V source (usually hot when your ignition is on) or a separate switched power source.
Turn Signal
The turn signal function is controlled via the yellow wire coming out of the back of the headlight. To operate this function, the yellow wire should be connected/tapped into your turn signal circuit (you’ll need to locate which wire is hot when your turn signal is activated). If connected, the top and bottom LEDs will automatically switch on and start blinking amber when your turn signal is activated.
*Questions or support, please email
support@HIDprojectors.com or call 716.662.3479. option 2, M-F 9a-5p ET