• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tube Shock Towers!

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
Here is a pair of 1.5"x.120 wall DOM shock hoops. These are not the typical both sides even type everyone else makes because often your mounting surface and where you need to mount them simply have to be different. These make it easy to mount them tilted forward or rearward and have enough tube. If you are one of the lucky few that can mount them straight up and down just cut off the extra tube!

R1771%20SWD%20LG.jpg


They come with two pair of our curved shock tabs so you can fine tune the height adjustment by the position of the tabs.

R1771%20SW%201k.jpg


Shock Hoop 1.5" - RuffStuff Specialties
 
OP
OP
Gravel Maker

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
Tall enough to pack a tall shock, coil-over, or airshock under the hood, but easily trim-able to any height to fit your rig.
 
OP
OP
Gravel Maker

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
Tall enough to fit the longest shocks you can feasibly fit, and you can trim them down to exactly what you need it you aren't going for a flex-monster.
 
Top