• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

c4 Dipstick--replacemet option?

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
Is there a good replacement option for the c4 dipstick that screws into the pan? Anyone installed one or have a pic?

thanx!
 

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,692
Loc.
Tomah WI
Hughes transmission has one. Either Jegs or Summit sells it. I need to get one because I do not have a dipstick and I need one. Anyone have any other ideas?
 
OP
OP
HotWheels

HotWheels

Bronco Guru
Joined
Jul 8, 2003
Messages
9,179
Loc.
Twilight Zone
I was thinking lokar. Not sure on the length though. I've also seen that Milodon had one. JBG sells one that is suppose to be resistant to poping out and it had a horses head on it (at least I think it was JBG; have to check again).
 
Top