• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

WY Built 1969 Bronco

Status
Not open for further replies.

bob_lafrentz

Sr. Member
Joined
Feb 18, 2004
Messages
453
Loc.
Cody, WY
1969 Ford Bronco (over $30k in this rig)

  • New ignition switch, lock cylinders, headlight switch, dimmer switch, turn signal switch
  • Radiator cleaned and rebuilt, new radiator hoses, heater hoses, and radiator brackets
  • Door hinges rebuilt
  • New Centech body harness and ignition switch harness
  • New NV4500 (5-speed manual) and Atlas II transfercase from Advance Adapters
  • Centerforce II clutch
  • New high angle drive shafts (front and rear)
  • IDIDIT tilt steering column and Grant steering wheel
  • Flaming River steering column joints
  • New BC Broncos power steering kit
  • Rebuilt D44 front axles with new seals, bearings, Warn hub locks, braided brake lines, F-150 tie rod conversion, new bumpstops, new bushings, new trackbar, heavy duty D44 axles, F-150 heavy duty knuckles/spindles, new ball joints, and new rotors/calipers/pads
  • Rebuilt Ford 9” rear axles. New wheel cylinders/brake shoes/drums, braided steel brake lines, new axle seals/bearings and pinion seals/gaskets.
  • BC Broncos power brake kit with new vacuum assist and master cylinder. Also, new brake lines and adjustable proportioning valve.
  • 1993 Mustang GT 5.0 transplant. Bored .030” over. Ported and polished. Rebuilt by Dave Hiatte Machine Shop in Clovis, CA.
  • New 3G high output alternator
  • New plugs, wires, and rebuilt distributor
  • Wild Horses titanium shorty headers
  • New accelerator cable, speedometer cable, and VSS sensor (Wild Horses)
  • New O2 sensors, thermostat, and water pump
  • New engine wiring harness
  • Rebuilt heater box with all new gaskets, new high volume blower motor/cage, and heater core
  • 3.5” suspension lift and 2” body lift from BC Broncos. Heavy duty shackles with greasble bolts, heavy duty front shock mounts, heavy duty u-bolt kit, track bar riser, new nitrogen filled shocks, all new bushings and body mounts, and CAGE long arms.
  • Heavy duty custom built rock sliders (.25” full wrap)
  • Custom rear bumper with swingout spare tire carrier and high-lift jack mount.
  • Back seat (currently not installed, but as simple as a few bolts)
  • Tuffy lockable metal center console with radio
  • Bikini top
  • Too many other new installed to list
  • Boxes of extra parts….

I have it listed on Ebay right now, http://http://www.ebay.com/itm/112341105444?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

If you want any pics or anything, just holler. Thanks for looking.
 
Status
Not open for further replies.
Top