Sbolt19
Bronco Guru
I found out today that my driver brake & blinker lights are not working, but there is something funny going on past that. I am not any good (and I stress that with double underlines) at electrical. It just does not register at all with me. So, here is my problem, and it is easier to list it all out.
With Lights Both On & Off and High or Low Beams
TAIL LIGHTS
Driver Blinker - NO
Pass Blinker - Yes
Driver Brakes - NO
Pass Brakes - Yes
Driver Flasher - NO
Pass Flasher - Yes
FRONT PARK LIGHTS
Drive Blinker - Yes
Pass Blinker - NO
Drive Flash - Yes
Pass Flash - Yes
All lights come on when I turn my headlights or parking lights on. My guage lights all work except the pass blinker and that only works when I have my flashers on.
So with that, I know I have all working lights, which I double checked every bulb and they are all good. I have also checked the connections at the brake switch and one side looked bad so I replaced the female spade connector and tried it all again. Same results. I checked both flasher switches (silver canisters in the wiring harness) and both had good connections. Where do I go from here?
With Lights Both On & Off and High or Low Beams
TAIL LIGHTS
Driver Blinker - NO
Pass Blinker - Yes
Driver Brakes - NO
Pass Brakes - Yes
Driver Flasher - NO
Pass Flasher - Yes
FRONT PARK LIGHTS
Drive Blinker - Yes
Pass Blinker - NO
Drive Flash - Yes
Pass Flash - Yes
All lights come on when I turn my headlights or parking lights on. My guage lights all work except the pass blinker and that only works when I have my flashers on.
So with that, I know I have all working lights, which I double checked every bulb and they are all good. I have also checked the connections at the brake switch and one side looked bad so I replaced the female spade connector and tried it all again. Same results. I checked both flasher switches (silver canisters in the wiring harness) and both had good connections. Where do I go from here?