bronco-billy-66
Bronco Guru
I got my efi finshed up today . And it runs;D ...351W ,truck lower,BC adapter,car upper. RJM harness..I ran out of time and couldnt set the timing at 10 deg. It runs alittle rough i hope timing fixes that..my alternator isn't charging, I hooked the ALT. wire on the RJM harness to the Green/Purple(hot in run) wire on the alt. is this right?? Here is the ALT diagram http://www.bcbroncos.com/2g alt with watermark.pdf
Also it wouldn't fire the plugs with the ignition key.. I had to use a remote button, I know that is a no no. I've had a little trouble with the key switch in the past, had to move the key alittle to make the gauges work..not all the time just once or twice. Ran fine with the carb. Does this sound like i need a new key switch ? or is there something else i'm missing?? Thanks guys , I could never have gotten this far without CB.com
Also it wouldn't fire the plugs with the ignition key.. I had to use a remote button, I know that is a no no. I've had a little trouble with the key switch in the past, had to move the key alittle to make the gauges work..not all the time just once or twice. Ran fine with the carb. Does this sound like i need a new key switch ? or is there something else i'm missing?? Thanks guys , I could never have gotten this far without CB.com