|
|
Welcome to the ClassicBroncos.com Forums.
You are currently viewing our boards as a GUEST which limits your access to viewing only. To take advantage of all the forum features please take a moment to register. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact the admin.
If you've lost your password click here.
|
08/03/09, 05:18 PM
|
#1
|
|
Full Member
Sacramento
Joined: Jul 08
Posts: 181
|
My 74 has an after market ignition switch in it. I bought an ignition switch door lock combo from BC. I have a wiring diagram that shows the wires that go to the switch but not which terminal they go to.
Any one have a better diagram or can tell me where they go? None of the terminals on the switch are marked.
Thanks.
|
|
|
|
|
|
08/03/09, 05:58 PM
|
#2
|
|
Contributor
Bronco Guru
It's not dented, it's just been environmentally streamlined!
Aurora, CO
Joined: Aug 07
Posts: 5,836
My Gallery
|
Try these. You might have to use an ohmmeter to figure out which terminals are which but you can see the factory wires colors here.
|
74 Sport U151, 5.0 must-plorer EFI, C4, PS, front discs, twin sticks, 3.5" susp/1" body, 33's, 4.11's, ARBs, Hickey Sidewinder
|
|
|
|
08/03/09, 10:51 PM
|
#3
|
|
Full Member
Sacramento
Joined: Jul 08
Posts: 181
|
Thanks Viperwolf, I think that is going to do it. Assuming the two loops go around the post and the ground goes to the outside terminal.
|
|
|
|
|
|
|
08/03/09, 11:17 PM
|
#4
|
|
Contributor
Bronco Guru
It's not dented, it's just been environmentally streamlined!
Aurora, CO
Joined: Aug 07
Posts: 5,836
My Gallery
|
Yes that is correct.
|
74 Sport U151, 5.0 must-plorer EFI, C4, PS, front discs, twin sticks, 3.5" susp/1" body, 33's, 4.11's, ARBs, Hickey Sidewinder
|
|
|
|
|
08/03/09, 11:57 PM
|
#5
|
|
Full Member
Sacramento
Joined: Jul 08
Posts: 181
|
Thanks much.
|
|
|
|
|
|
|
08/05/09, 01:20 PM
|
#6
|
|
Full Member
Sacramento
Joined: Jul 08
Posts: 181
|
New switch in, everything works. I am so happy. Thanks again Viperwolf.
I was a little disappointed in the quality of the bezel, keys and lock cylinder.
On to the door locks.
|
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 10:47 AM.
|
