• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on. - Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

CO 68 Bronco For Sale

Status
Not open for further replies.

Broncobeast69

New Member
Joined
Oct 18, 2017
Messages
2
I am selling my 68 Bronco. It has not been on the road in 6 years. It has a 351W with Edelbrock EFI. It also has 9" with 5.13 gears and disc brakes and Detroit Locker, Dana 44 front with 5.13 gears and disc brakes, power steering, NP435 Trans, Super Swamper 38.5" on bead locks. The bronco is not running at the moment because I removed the wiring harness (I have a new one that goes with the bronco). I also removed the fuel lines and brake lines so they will need to be replaced as well. It needs some work. It would be an easy fix for someone who is mechanical. It has no seats or top. Text me for photos or if you are interested. 970-497-0832
 

Merlin76

Sr. Member
Joined
Oct 14, 2002
Messages
618
Haha, alright. I am taking some as I run through disassembly. Going to fully document this frame-off, so if I can find time I will start a build thread. I always start with the intention of doing a build thread and always lose track and run out of time to actually keep posting progress and such...

This thing has good bones and has some redeeming qualities, but unless you aren't afraid of sheet metal work this one was not the right one for you. I am going to be replacing @ 75% of the sheet metal... (No offense intended Jeff)

Don't get me wrong, lots of good stuff with this rig. pretty much rust free '68 doors with removable window frames, good solid frame with zero rust through. Rear fender seam is zero rust, and a rust free core support is usable once it gets straightened back out. Plus the 351W is sporting an Edelbrock Pro-Flo 2 MPFI kit. So I feel like the price was pretty fair.
 

Merlin76

Sr. Member
Joined
Oct 14, 2002
Messages
618
some pre-teardown pics
 

Attachments

  • IMG_20180202_203717.jpg
    IMG_20180202_203717.jpg
    110.7 KB · Views: 196
  • IMG_20180202_203723.jpg
    IMG_20180202_203723.jpg
    103.8 KB · Views: 178
  • IMG_20180202_203729.jpg
    IMG_20180202_203729.jpg
    84.6 KB · Views: 178
  • IMG_20180202_203749.jpg
    IMG_20180202_203749.jpg
    143.5 KB · Views: 171
  • IMG_20180202_203802.jpg
    IMG_20180202_203802.jpg
    58.5 KB · Views: 164
Status
Not open for further replies.
Top