• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

jray

Full Member
Joined
Sep 20, 2009
Messages
340
Flushed the cooling system, installed new heater hoses and bottom radiator hose, filled with antifreeze/water.............and found a pin hole leak in the radiator!
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
11,851
I think my '67, the infamous Island Queen, is sold. ;-(

But on a positive note, I finally solved the interference issues that were preventing my laptop from communicating with the Holley HP ECM while the engine in the '69 was running. WooT!!..let the serious tuning of that ole 4.0 V-8 commence. Gonna be a productive weekend...I can feel it.
 

AKwheeler

Full Member
Joined
Apr 25, 2007
Messages
171
Dropped off the 4R70W to be rebuilt, worked out all the details for the trans controller and my Edge converter arrived. Also signed up for both Holley and FAST tuning classes, cause FUN.
 

NGABronco

Contributor
Bronco Guru
Joined
Feb 4, 2007
Messages
7,343
Loc.
N. GA now South Carolina
Pretty weather and I was tired of working on a dirty rig!!! Got the Crawler and pressure washer out and gave that dog a bath!!!;D;D;D

Made some tracks in the yard too!!!%)%)%)
 

Attachments

  • DSCN9648.JPG
    DSCN9648.JPG
    210.8 KB · Views: 96
  • DSCN9646.JPG
    DSCN9646.JPG
    183.4 KB · Views: 81
  • DSCN9656.JPG
    DSCN9656.JPG
    227.1 KB · Views: 63

Superwoody

Jr. Member
Joined
Aug 30, 2012
Messages
80
Loc.
Skyline
I ordered a family roll cage and new front seats. Neither have came in yet so it’s not actually “done” to the Bronco yet but will be ASAP
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
11,851
Two hours of fuel table and idle control tuning..and the ole 4.0 is really starting to sing.

Got one flaky injector though..'swat I get for using 25 year old parts. ;-p
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
20 year old parts on a 60 year old motor. Seems kinda new
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,469
Got my mirrors installed woohoo! ;)
 

Attachments

  • IMG_0128.jpg
    IMG_0128.jpg
    106.2 KB · Views: 49
  • IMG_0133.jpg
    IMG_0133.jpg
    81.2 KB · Views: 42

Tugross302

Sr. Member
Joined
Jul 7, 2010
Messages
785
Just took a picture. She’s ready for a drive but the roads still have salt on them. So that’s all I did to mine today
 

NCBeachBronco

Jr. Member
Joined
Sep 29, 2002
Messages
64
Changed out pesky door latch on passenger side, re-aligned scrubbing driver side door, changed out main tank sending unit and drove it!
 
Top