• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LA Atlas 4.3 built for C-6, ZF, 4r70w

Status
Not open for further replies.

74dave

Jr. Member
Joined
Jun 28, 2008
Messages
97
Atlas transfer case. Built for Ford C-6, ZF, 4r70w, 2000$
4.3 gear ratio, 300m outputs, short heavy duty tailhousing, shifters included, 1350 cv rear, 1350 non cv front, NO speedo connection.

Can deliver to OCBR.
 
Last edited:

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Dave, how much use do you have on this? I am interested.
 
OP
OP
7

74dave

Jr. Member
Joined
Jun 28, 2008
Messages
97
Its about 6 years old and was installed in off road use only buggy, so no highway miles. im guessing it has approx. 25-30 weekend trips on it. Was removed 2 years ago and has been in my shop. Never had water in it, no rock rash. Fresh fluid change prior to removal.

Also has the optional oil level site tube.
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,491
Hello Dave. You say built for a c6. If it fits a c6 then it will also fit a 4r70w? Just thought I would throw this out there.
It may help with the sale.
 
OP
OP
7

74dave

Jr. Member
Joined
Jun 28, 2008
Messages
97
Sorry, i cant confirm the fitment to other trans.
Thanks for the additional info and yes it will help with the sale.
 
OP
OP
7

74dave

Jr. Member
Joined
Jun 28, 2008
Messages
97
Thanks for the input guys, i comfirmed with AA.

Message from advance adapters,

Yes a 31 spline 4r70W or ZF transmission will also work. Being that the ford autos mainly came as a 31 spline and a 6 bolt round tail housing, it creates swapping transfer cases simple and easy.
 
Status
Not open for further replies.
Top