• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LA Drum brake backing plate needed

Status
Not open for further replies.

Brahmus

New Member
Joined
Nov 30, 2006
Messages
18
Loc.
Delcambre, La
Does anyone have a passenger rear backing plate for 11" Drums, 3.150" bearing 1.75" wide pads? I seem to have lost the entire passenger side brake setup and now that i'm putting it back together it appears I can buy everything new easily but that.

Flange holes are 2.375 x 3.500

Alternatively, I'd but the entire setup if it's in good shape as I will replace most everything on the Driver's side anyway.
 

lynn w gray

Full Member
Joined
Feb 21, 2007
Messages
328
rear backing plate

Does anyone have a passenger rear backing plate for 11" Drums, 3.150" bearing 1.75" wide pads? I seem to have lost the entire passenger side brake setup and now that i'm putting it back together it appears I can buy everything new easily but that.

Flange holes are 2.375 x 3.500

Alternatively, I'd but the entire setup if it's in good shape as I will replace most everything on the Driver's side anyway.

i'm sure i have one..............free in pineville, 318-229-2264. text me and i will send you a pic. lynn
 
Status
Not open for further replies.
Top