• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

TN D44 drum brake knuckles & spindles

Status
Not open for further replies.

clarrance

Bronco Guru
Joined
Mar 3, 2005
Messages
2,674
Looking for some knuckles & spindles for the 71.5 - 75 drum brake Dana 44 axles. PM me with the details. Thanks
 
Last edited:

Joe473

Sr. Member
Joined
Jul 16, 2012
Messages
950
I have the whole set up drums and all. Shipping would be a bear though from NJ. Ever come out east or know anyone out this way?
They are off a Sept 71 build D44 with ball joints.

Sent from my SM-G900V using Tapatalk
 
OP
OP
clarrance

clarrance

Bronco Guru
Joined
Mar 3, 2005
Messages
2,674
Anyone else have any spindles, knuckles, & hubs laying around. I need several sets.
 

Doyle

Bronco Guru
Joined
Jun 12, 2006
Messages
1,015
I have everything from ball joints out off a 73, did the disc conversion with 79 parts. Also have a set of stock axles, open diff with 3.50 gears, stock 44 cover, and most of a power steering setup, hardtop glass, and a few other things. I'm about 1.5 hours east of you. Just outside the Tri-cities area. Ever up this way? Gas probably cheaper than shipping if you got the time. If interested in any or all PM me.
 
Status
Not open for further replies.
Top