• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

FL Aux tank, hood, driveshaft, filler, shocks

Status
Not open for further replies.

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Driveshaft $180 great shape
High capacity steel aux tank, vented with efi return $200
‘67 filler neck and cap $45
Doetsch tech front shocks 3.5” lift $45
SOLD - ‘67 hood, decent shape, has a crack to weld but no major rust or dents 7 out of 10 $180

PM with questions, thanks,
Dave
 

Attachments

  • 6B781E76-8D03-4359-BC06-74F0A7E501B6.jpg
    6B781E76-8D03-4359-BC06-74F0A7E501B6.jpg
    110.9 KB · Views: 106
  • D91B495D-47F6-46CA-8627-B9E12647B81E.jpg
    D91B495D-47F6-46CA-8627-B9E12647B81E.jpg
    102.1 KB · Views: 71
  • EEE8F614-DCA1-423A-B188-6CB7E36E79E0.jpeg
    EEE8F614-DCA1-423A-B188-6CB7E36E79E0.jpeg
    66.8 KB · Views: 92
  • 11887A70-F1E2-41C1-B0F0-7B934F49CD02.jpg
    11887A70-F1E2-41C1-B0F0-7B934F49CD02.jpg
    142.3 KB · Views: 101
  • 8BF031E4-876E-46EA-AA15-A90EF954EC4A.jpg
    8BF031E4-876E-46EA-AA15-A90EF954EC4A.jpg
    97.8 KB · Views: 94
  • 27BFE45F-603C-456D-8444-151A6A093B3B.jpg
    27BFE45F-603C-456D-8444-151A6A093B3B.jpg
    60.1 KB · Views: 86
  • FDEDC045-8B35-406D-9812-0042AAC37A33.jpg
    FDEDC045-8B35-406D-9812-0042AAC37A33.jpg
    187.5 KB · Views: 63
Last edited:
OP
OP
Cortez

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Driveshaft should fit 2.5 and maybe 3.5” lift. Shoot me your measurements and I can see what the collapsed and extended length is. I had 3.5 add a leaf but when I replaced them with 3.5” 9 leaf pack and moved the axle back additional 1.25” then I ran short.
 
OP
OP
Cortez

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Driveshaft measures 32.5” collapsed to 35.5” extended
 

Teal68

Contributor
Bronco Guru
Joined
Mar 28, 2013
Messages
2,567
Loc.
Inlet Beach
It looks almost new, or is it just freshened up? Any slop in the splines?

The Bronco I was thinking about using it on currently has stock springs, but I was thinking that is a pretty good deal for a shaft when I go to lift it!
 
OP
OP
Cortez

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Just used a wire brush and fresh black paint to clean it up. But, no issue with the ujoints and no slop in the splines...just too short now with my axle set back. Guessing about 10k miles on it.
 
OP
OP
Cortez

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,193
Come and get it -throw me an offer, all still available. I need the garage space!
 
Status
Not open for further replies.
Top