• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fab shop to modify roll cage roof

73 bronco 347

Full Member
Joined
Apr 28, 2016
Messages
235
I had to do some modifications to my family cage. Now the nice sheet metal roof that was on it does not fit the Zeus fasteners that are on the cage. I am looking for a fab shop to modify my current roof if possible if not build me a new one. I live 100 miles north of phoenix Az any suggestions on shops would be appreciated. Thanks in advance.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
47,345
Bummer on the little things that make our lives so "interesting" sometimes, eh?

Sorry can't help. But back to the top of the page for you, and good luck!

Paul
 

langester

Contributor
MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,660
I was looking at Drivenautoparts.com site, they are in Phoenix, and at the bottom of the home page they list businesses they deal with. There is one close to you that does fab work, might check them out. http://www.bentfabaz.com/

Good luck, post up some pics when you get it finished.
 

AZ73

Contributor
Bronco Guru
Joined
Mar 28, 2012
Messages
3,541
Protofab is right next door to you in Dewey (88 miles north) but I'm not sure they would do this work for you. Doesn't hurt to call them and ask. Tell them its for a Bronco.

https://protofab4x4.com/

Bentfabaz (noted by Langester) is a further south (it's Deer Valley exit off the 17). I spoke with them 3 weeks ago about doing some work and was told they are backed up for months and are going to be moving to a new location which is going to slow things down for them, but again, it doesn't hurt to call them.

I buy my steel just up the street from Bentfabaz - Southwest Steel, and they know a lot of the metal fabricators in the area. Might want to call them and ask if they deal with anyone up north.

http://www.sw-steel.com/

Btw, I like your style of Bronco. I got a 73 347 myself ;D
 
Last edited:

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
34,833
I would also recommend Bent Fab. Driven is also good. They have a back log as well. For your needs, I would pick Bent Fab.

Get your place in line soon. There is a spike after the stampede.
 
Top