rookie question

bobtail · May 24, 2018

I am considering buying an edelbrock performer intake dual plane no egr. my engine now has an edelbrock egr adapter that has the egr blocked off with a plate. the adapter is also a 1" aluminum spacer set up for a 2 barrel carb. my question is with the use of the spacer can I use a 2 barrel carb on a dual plane edelbrock intake?

LilMixedUp · May 24, 2018

in my simple mind I don't see why not. All you'd be doing is ensuring that both banks of the engine are getting equal fuel. With an open bore there's always the possibility of more fuel getting to one side or the other. Really need some of the carb experts here to chime in...

SteveL · May 24, 2018

Is it the same manifold other than the block off plate? If so why change it?

Eoth · May 25, 2018

Basically this? (scroll down a little)

http://www.edelbrock.com/automotive/mc/manifolds/ford/performer-351.shtml

blubuckaroo · May 25, 2018

If you're just using the spacer as a 4bbl to 2bbl adapter, why not get another adapter that isn't an EGR spacer?
http://www.edelbrock.com/automotive/mc/carburetors/access-adapters.shtml
https://www.summitracing.com/parts/mrg-1933/overview/

SHX669 · May 25, 2018

There's no problem running a 2 barrel carb on a 4 barrel intake. You just have to use a 2brl x 4brl adapter. I did it for a year or so while "making up my mind " on which carb or fuel injection. In my case the motor seemed to run better with the 4brl intake than it did with the factory 2brl intake.

rookie question

bobtail

Sr. Member

LilMixedUp

Full Member

SteveL

Huge chevy guy

Eoth

Bronco Guru

blubuckaroo

Grease Monkey

SHX669

Bronco Guru

Similar threads