- Joined
- Dec 4, 2010
- Messages
- 961
Is anyone running the 23 gal Sherman tank w/o venting to a charcoal canister and just using the vent to the filler neck for the tank to breathe? I've got the charcoal canister mounted well above my tank in the engine bay. Also have a catch tank just before the canister and filled it up in no time after filling the gas tank to about 3/4 full.
Took a few turns and next thing I know the engine is bogging from the excess gas being stuffed directly into the upper manifold. My vent out of the canister runs to a vacuum port on the upper manifold. Can't drive it like this, for sure!
I'm running a '96 EFI that has a return, so I don't have another port on the tank to drain the catch tank back to it.
Thanks in advance for your advice. Cheers, B2
Took a few turns and next thing I know the engine is bogging from the excess gas being stuffed directly into the upper manifold. My vent out of the canister runs to a vacuum port on the upper manifold. Can't drive it like this, for sure!
I'm running a '96 EFI that has a return, so I don't have another port on the tank to drain the catch tank back to it.
Thanks in advance for your advice. Cheers, B2