Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Good to hear. Mine was kinda the opposite. Pedal moved about an inch or two and hard three inches from the floor. Last night it went nearly to the floor before getting hard.
Can't tell you that. never used them. I'd think it'd wake it up but Idle should be fine. And check clearance with push rod guides and stuff. That added length on the arm can make the push rods rub on stuff.
no. start a build thread. Tear it all down and start over. Show a pic for every bolt torqued. ;D Because all this has nothing to do with OCBR '18 or '19.;D
no. start a build thread. Tear it all down and start over. Show a pic for every bolt torqued. ;D Because all this has nothing to do with OCBR '18 or '19.;D