• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

mastercraft seat sliders?

zman1971

Jr. Member
Joined
Apr 19, 2012
Messages
99
I mounted my new mastercraft seats using the stock slider, pretty much just bolts right up to it,I had to shim it up 3/8s of an inch but thats it. Now the seat seems to sit higher the stock(wife's feet cant reach pedals) My question is do you think or know if the adapters and sliders from wild horse would be any lower? Any one have any pics or measurements of this set up?
I would post pics but it will not let me post pics anymore?
 

Attachments

  • IMG_20171210_162726658.jpg
    IMG_20171210_162726658.jpg
    80.9 KB · Views: 62
  • IMG_20171210_162608084.jpg
    IMG_20171210_162608084.jpg
    80.4 KB · Views: 63
  • IMG_20171210_162453632.jpg
    IMG_20171210_162453632.jpg
    90.1 KB · Views: 56
  • IMG_20171210_162558131.jpg
    IMG_20171210_162558131.jpg
    83.3 KB · Views: 53
Last edited:

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,916
Don't think I could get a decent photo of the WH adaptors.
But they are plates that are bent up on the ends. They bolt into the stock holes and the seats bolt to them. I cannot imagine anything lower...
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,916
That's mine.
Better photo than I thought it would be in the dark.
 

Attachments

  • 15129638844742025827597.jpg
    15129638844742025827597.jpg
    79.3 KB · Views: 67

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
mine sit flat, they are over priced as far as I am concerned. They work Ok, not great, just Ok
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
mine came from Mastercraft. I don't what WH sells but mine are different than what Bronconut has. and it looks like I better recheck the bolts to see if they are tight.
 

Attachments

  • 20171210_211737.jpg
    20171210_211737.jpg
    94.8 KB · Views: 53
  • 20171210_211826.jpg
    20171210_211826.jpg
    100.5 KB · Views: 44

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
7,796
Mine are mastercraft sliders and look very flat just like ones above. OP picture doesnt look like EB specific sliders. Maybe fullsize bronco?
 
Top