• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wild Horses Wind Breaker?

Hazegray

Sr. Member
Joined
Aug 10, 2004
Messages
795
I searched and found a thread back in 07 for the Wind Breaker, but I cannot locate it on their site. Are they out of production?

I made a custom half-hard top and need something to keep out the wind...
 

Major Tom

Contributor
Sr. Member
Joined
Feb 15, 2012
Messages
572
I had them make me a custom one to fit my roll bar in 2016. I will look and see if I can find a part #
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
A couple of years ago DirtDonk said that the guy that was making them for Wild Horses quit making them, I have not seen anything since then about a new maker for them
 

Major Tom

Contributor
Sr. Member
Joined
Feb 15, 2012
Messages
572
this is the one I had built for me
 

Attachments

  • 20160115_153639 (1).jpg
    20160115_153639 (1).jpg
    75.1 KB · Views: 89

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Look up a local awning shop. There is also Rader Awning here in Abq. that could make one. I've worked with them making enclosures for golf carts.
 
OP
OP
H

Hazegray

Sr. Member
Joined
Aug 10, 2004
Messages
795
As it stands, might just get some thin plywood, cover with material and call it a day.
 

Scoop

Contributor
Have Bronco, Will Travel
Joined
Feb 1, 2006
Messages
10,603
Loc.
Cuchara, CO
I made one entirely out of clear vinyl and simply attached it to the roll bar with sticky-back velcro. Very simple and worked very well.
 
Top