• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Installing mount/sliders to Mastercraft seat

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,823
For those of you who have done it, how'd you do it?
 

Attachments

  • Seats.jpg
    Seats.jpg
    63.6 KB · Views: 80

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,033
I used my factory sliders, a few washers as spacers and my Mastercraft Sportsman seats pretty much bolted right up with minimal fuss. It's been about 10 years, so I'm sure it involved some scraped knuckles and such, but I don't remember it being difficult by any stretch of the imagination.
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
It's not easy, I can't remember what order it all went in but I did it at least twice and took two people, lots of beer and 4 letter words.
 
OP
OP
gr8scott

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,823
It's not easy, I can't remember what order it all went in but I did it at least twice and took two people, lots of beer and 4 letter words.

You weren't joking. So I got them in today, they sure do feel good.
 

Attachments

  • 20180916_172907.jpg
    20180916_172907.jpg
    97.2 KB · Views: 42
Top