- Joined
- Dec 9, 2006
- Messages
- 479
Don’t need to sell, Reasonable offers will be considered.
I can deliver to Texas round up if needed. Trailer wont be included.
Runs good, drive great. needs some brake work but stops fine. Crawls where its pointed.
Details:
66 Ford Bronco $13,000 OBO, last price drop
Clear Texas Title
Bed lined interior, no rust
Powder coated dash (stock grey color)
CB
Stock stereo in dash (AM works but not connected)
Tuffy locking console between seats, Sony stereo (connected)
Sound bar on roll cage with Sony speakers
Locking tuffy console under passenger seat
PRP racing seats front and rear (recliners front, bench rear)
Rear seat is on track and is seat is easily removed/installed
Lap belts rear, shoulder harnesses front (have 2 PRP harnesses, included, not installed)
Custom roll bar with rear rack built for Yeti cooler (over fuel cell, yeti not included)
5 gallon fuel cell (perfect for a full day of wheelin’)
Custom pull out rack with fluid and storage containers in rear (under Yeti rack)
CO2 set up mounted to cage
Fire extinguisher mounted to cage
Bailie Built front and rear bumpers (front bumper for Warn 8274, winch not included)
Centex wiring harness
Wheel base stretched 10” (102” wheel base)
Custom four link rear
Duff long arms in the front
Atlas 2, 5 to 1 low (twin sticks)
Large rear drive shaft with drive flange to Atlas
Custom skid plate under t case
¼ wall rock sliders (rockers)
302 with a B cam Fuel Injected, runs great
Derale fixed pitch fan for improved slow speed cooling
Wild horses fan shroud
New Optima Yellow top battery
BC headers into 3” exhaust exiting in front of passenger tire
Fuel injected
K&N air filter
Newer radiator, with power steering cooler in front)
Tranny cooler under driver seat with electric fan (fan controlled by switch)
Built C4 (Kevlar clutches)
Art Carr shifter
Shaved 9” rear (drum brakes, I have a disc brake set up, will include)
9” yoke protection
ARB lockers front and rear (switches mounted to cage)
4.11 gears front and rear
ARB compressor under hood
Danna 44 front, chromoly axles, CTM u-joints, Warn hubs, Disc brakes, ARB front cover
Have Ruff Stuff housing to build 609 front axle, can include
Power steering
PRP ram assist with PRP remote reservoir
Tilt steering column
ORI struts at all four corners with custom shock hoops all tied to cage. Front hoops have removable support over engine
37” BFG KM2’s on trail ready bead locks (newer 37” Krawlers included)
Spare wheel DIY 17” bead lock
BC corner protectors
PNW side protectors
Worn trail cover top
Electric wipers
All gauges work (needs some attention)
Body needs some work and paint
I’m sure i’m forgetting some things. Its ready to wheel. Did I say no rust. Its solid. Frame is painted
$13,000 OBO. Make me an offer
I can deliver to Texas round up if needed. Trailer wont be included.
Runs good, drive great. needs some brake work but stops fine. Crawls where its pointed.
Details:
66 Ford Bronco $13,000 OBO, last price drop
Clear Texas Title
Bed lined interior, no rust
Powder coated dash (stock grey color)
CB
Stock stereo in dash (AM works but not connected)
Tuffy locking console between seats, Sony stereo (connected)
Sound bar on roll cage with Sony speakers
Locking tuffy console under passenger seat
PRP racing seats front and rear (recliners front, bench rear)
Rear seat is on track and is seat is easily removed/installed
Lap belts rear, shoulder harnesses front (have 2 PRP harnesses, included, not installed)
Custom roll bar with rear rack built for Yeti cooler (over fuel cell, yeti not included)
5 gallon fuel cell (perfect for a full day of wheelin’)
Custom pull out rack with fluid and storage containers in rear (under Yeti rack)
CO2 set up mounted to cage
Fire extinguisher mounted to cage
Bailie Built front and rear bumpers (front bumper for Warn 8274, winch not included)
Centex wiring harness
Wheel base stretched 10” (102” wheel base)
Custom four link rear
Duff long arms in the front
Atlas 2, 5 to 1 low (twin sticks)
Large rear drive shaft with drive flange to Atlas
Custom skid plate under t case
¼ wall rock sliders (rockers)
302 with a B cam Fuel Injected, runs great
Derale fixed pitch fan for improved slow speed cooling
Wild horses fan shroud
New Optima Yellow top battery
BC headers into 3” exhaust exiting in front of passenger tire
Fuel injected
K&N air filter
Newer radiator, with power steering cooler in front)
Tranny cooler under driver seat with electric fan (fan controlled by switch)
Built C4 (Kevlar clutches)
Art Carr shifter
Shaved 9” rear (drum brakes, I have a disc brake set up, will include)
9” yoke protection
ARB lockers front and rear (switches mounted to cage)
4.11 gears front and rear
ARB compressor under hood
Danna 44 front, chromoly axles, CTM u-joints, Warn hubs, Disc brakes, ARB front cover
Have Ruff Stuff housing to build 609 front axle, can include
Power steering
PRP ram assist with PRP remote reservoir
Tilt steering column
ORI struts at all four corners with custom shock hoops all tied to cage. Front hoops have removable support over engine
37” BFG KM2’s on trail ready bead locks (newer 37” Krawlers included)
Spare wheel DIY 17” bead lock
BC corner protectors
PNW side protectors
Worn trail cover top
Electric wipers
All gauges work (needs some attention)
Body needs some work and paint
I’m sure i’m forgetting some things. Its ready to wheel. Did I say no rust. Its solid. Frame is painted
$13,000 OBO. Make me an offer
Last edited: