• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ruffstuff 3 Link Kit!

Gravel Maker

Bronco Guru
Joined
Sep 13, 2006
Messages
2,351
Loc.
Sacramento
We have here everything to create a 3 link suspension, front or rear, and not low end stuff just to be cheap either! The kit is wrapped around 6 of our 1.25" Heat & Cryo Treated Chromoly Heims with Stainless High Misalignment, Zink Plated Jam nuts, and 1.5" Tube ID Weld Bungs and another set of the same in 7/8" for the Panhard. We add our Chassis Link Brackets, a 10 degree Adjustable Axle Link Tower, a 10 degree Adjustable Frame bracket for the 3rd link, the Axle Lower Link brackets. We finish the Kit off with the Panhard setup, an Axle Offset panhard Bracket & the Frame panhard (Inside or Outside).

normal_3%20link%20kit.jpg


We do not include the tubing because you will save alot of money buying your tube locally when you add the shipping cost of the tube, 2" x .25" wall DOM weighs over 4.5lbs a foot! If you need to change anything give us a call and we can mix & match til its right for you! We do have DOM as an option but always price it locally first...

These are $573 and $23 to ship, sound fair to you?
 

Jwredneck

Contributor
Jr. Member
Joined
Feb 23, 2010
Messages
108
Loc.
Edgewood,Wa
Dan from experience I found the 10 degree is too tight to fit in our narrow Bronco frames. I used your 3 link kit, but had to use zero degree for the upper link. Maybe add a zero degree option when ordering?
 
Top