Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Any tips on powering this beast? Mine was missing the little module that the power cable connects to. I'm thinking i'll need a solenoid of some type and a push button switch. I'll run the brake and clutch cables to the cab as I still have that cable controller
Thanks pops. I spent like 4 hours this morning cleaning, painting, drilling, wilding, fitting to get it where it's at. I still need to mount the controls, wire it and weld on some nice D rings