• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

OR Explorer / Windstar PCM mount

Status
Not open for further replies.

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,223
I'm hoping someone has an extra laying around. I forgot to pull mine before I scrapped the Explorer.
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
5,749
Loc.
San Martin, CA
Trying to save myself a trip to the pick-n-pull due to lack of time

I feel your pain... Especially down here in the Bay area

I got lucky while I was in Idaho this June on vacation, picked up that and a bunch of other stuff for under $40.

Good luck Jaromy. Doug
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,223
I feel your pain... Especially down here in the Bay area

I got lucky while I was in Idaho this June on vacation, picked up that and a bunch of other stuff for under $40.

Good luck Jaromy. Doug

Thanks Doug! I was trying to avoid it, but it looks like I’ll be searching this weekend.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
10,080
I see them all the time in the yards - what's the trick to getting them out? Seems like they're glued to the firewall but I think it's more than that.

Todd Z.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I see them all the time in the yards - what's the trick to getting them out? Seems like they're glued to the firewall but I think it's more than that.

Todd Z.

Some Ford PCM boxes are not only glued in but bolted in from behind too.
 

ame

Full Member
Joined
Jun 28, 2016
Messages
191
Has anyone thought of just making a CAD file for one and making new ECM mount?? I have an explorer one in my garage but will be using, it would be pretty easy and cheap for someone to do, surprised one of the Bronco stores done have it already.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Has anyone thought of just making a CAD file for one and making new ECM mount?? I have an explorer one in my garage but will be using, it would be pretty easy and cheap for someone to do, surprised one of the Bronco stores done have it already.

The Bronco vendors all completely ignore the Explorer harness and PCM, they still only provide parts for the Mustang harness and PCM.

Your idea might be one for EFI Guy to consider, he does have a 3D printer now.
 
Status
Not open for further replies.
Top