• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuel sender/receiver not working

jj72

New Member
Joined
Nov 6, 2017
Messages
13
I am not getting a reading at the fuel gauge (indicates empty even though there is 5-6 gallons in the tank). I disconnected the harness from the sender mounted in the tank and measured the fuel sender to be 85-86 ohms.

Question 1: What should the ohm range be for the sender?

Question 2: Assuming the harness is okay, how hard is it to replace the gauge on the dash board as well as the sender in the tank?
 
Top