• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Center Console Mount

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,753
Loc.
Phoenix, AZ
Center Console Mounting Bracket in an Early Bronco
Tech article by Mike Kipper (Kip60)

After finally fixing the rust in the floorboards, it was time to put everything back in and make sure it fit in the old locations. I had purchased new seats and needed to get them in and also get the console in place. My seat belt holes are in weird locations and interfered with the placement of the console. Searching the forums, I noticed that JAFO had fabricated a bracket that went underneath the console itself to gain some clearance. I decided to take his design a step further and make the bracket solid to increase the rigidity, while bolting to the floor in existing bolt locations. It also allows for adjustability front to back.

Read the rest of this article »
 
Last edited:
Top